LED LCD TV PANEL REPAIR ACF Bonding Machines (Pulse Heat)

OLED LED LCD TV PANEL REPAIR ACF Bonding Machines

OLED LED LCD TV Panel Repair ACF Bonding machine is a repair system that ACF bonds Flex cables/ TAB / COF to PCB & ITO Glass

  • Accomodates up to Max 100" Display panel Sizes
  • Pulse Heat Systems
  • Vision Alignment System
  • Various Machine Sizes

LCD Panel Bonding Machine (CHEAPEST !!!)

Model: 3T-COF700PS
Compact Size : 860(L)x806(W)x1,450mm

Features: Repair ACF Bonding of TAB,COF on to LCD and PCB

This is the smallest machine, catering to repair shop with limited space.

Panel Max 100", Pulse Heat, 2 x HD C/LCCD Camera vision alignment, Accuracy ±0.015mm, Power Input:110VAC or 220VAC

Low Cost LCD Repair Bonder

Pulse Heat LCD Panel Repair Bonding Machine

Model: 3T-COF700PSW

Single Bond Head Wide Platform accomodate all panel sizes

This machine has a big base structure and platform to cater for the increasing LCD panel sizes in the market.

Panel Max 100", Pulse Heat, 2 x HD C/LCCD Camera vision alignment, Accuracy ±0.015mm, Power Input:110VAC or 220VAC

Pulse Heat ACF Bonding Machine Wide Body

LCD Repair ACF Bonding Machines (Maximum Productivity)

Model: 3T-COF700BDW

Wide Platform Double Bond Head

This machine has 2 bond head, of which 1 bond head can be preset for PCB bonding & 1 bond head preset for ITO glass bonding. Without having to convert the tools and program setting frequently to bond PCB and ITO glass, the reliability and efficiency is improved

Different manufacturers and models of LCD panels have different bonding areas. The bonding process and parameters must be carefully selected in order to achieve high success rate and original product makers’ bonding specifications.

Panel Max 100", Pulse Heat, 2 x HD C/LCCD Camera vision alignment, Accuracy ±0.015mm, Power Input:110VAC or 220VAC

Pulse Heat ACF Bonder Double Head

Contact us for more machines models...

Machine Accessories for ACF Bonding Use (Free with Machine order)

  • Air Compressor
  • Hot Air Blower
  • Optical Microscope
  • Absolute Alcohol
  • Hitachi Tuffy (Blue Glue)
  • Solering Iron
  • TAB Cutter
  • Allen Keys Set
  • LVDS
  • Cleanroom Wipes
  • Handheld Magnifier
  • Precision Tweezers
  • Alcohol Bottle
  • ACF Anisotropic Conductive FIilm
  • Teflon Roll
  • LCD Test Board
  • ACF Remover Liquid
  • Dial Gauge
  • Silicone Rubber
  • Acetone
  • Machine Accessories

    Key Points of Using ACF Anisotropic Conductive Film for LCD Display Panel Repair

    Basic Guide in handling ACF

    When the ACF is received from supplier, immediately store in refrigerator before using it.

    After removing ACF from refrigerator, thaw it for 30-60 minutes before using it. When the ACF is thawed to room temperature, remove it from sealed bag.

    After using the ACF, please seal the remaining unused roll with moisture absorber and seal it with a zip-lock bag before returning it in the refrigerator.

    If the ACF glue is completely hardened, loses its viscosity, cannot be removed from roll, or if the glue is difficult to be separated from the protective layer, it probably has deteriorated and could not be used. Please discard it and use a new ACF roll.

    When ACF is used to connect a product with high ITO density (fine pitch), that is, if the ITO has a small spacing (gap) between them, and if the bonding failed after repeated attempt, switch to an ACF with a high conductive particle density, such as: AC7246. Since many years ago, it has been proven repeatedly that AC-7206U-18 is suitable for common LCD screens of various sizes and models, and only a few high-resolution ITO screens with extremely small spacing cannot be fully applied successfully.